Test the ForceTriad™ generator accurately, comprehensively and quickly!
Our new interactive videos will show you the steps of calibration and preventive maintenance.
Even the slightest alteration in testing protocol can lead to:
Patient tissue burning and damage
Fire to equipment and facility
Operating room staff concerns
With numerous complex steps, calibrating and testing the ForceTriad can be a lengthy and complicated process, prone to error. Fluke Biomedical has taken the guess work out with an interactive video series that will guide you, step-by-step. Using our QA-ES III Electrosurgical Analyzer, you’ll be able to perform calibration and preventive maintenance on the ForceTriad generator per the manufacturer’s guidelines.
Know the tools you’ll need before you begin
Start and stop the video as needed
Skip to just the section(s) you want
Watch the complete video series and you'll learn:
ForceTriad generator calibration
Step 1: LC Filter Tuning
Step 2: Set Date and Time
Step 3: Brightness Calibration
Step 4: Touchscreen Calibration
Step 5: Scanner Calibration
Step 6: RF Leakage Calibration
Step 7: Current Calibration
Step 8: Voltage Calibration
Step 9: Auto-bipolar Calibration
Step 10: REM Calibration
ForceTriad generator preventive maintenance
Step 1: Inspect the System and Accessories
Step 2: Inspect the internal components
Step 3: Test the system
Step 4: Verify REM function
Step 5: Verify Autobipolar Mode
Step 6: Verify Cross Coupling
Step 7: Confirm Power Delivery at Receptacle
Step 8: Verifying Power Output
Step 9: Checking High Frequency Leakage Current
Step 10: Safety Testing in Accordance with IEC601
Click the image below to view a sample segment:
ForceTriad™ is a trademark of Covidien AG, photograph used with permission of Covidien