QA ES-III tests Force Triad

Test the ForceTriad™ generator accurately, comprehensively and quickly!

Our new interactive videos will show you the steps of calibration and preventive maintenance.

Even the slightest alteration in testing protocol can lead to:

  • Patient tissue burning and damage
  • Fire to equipment and facility
  • Operating room staff concerns

With numerous complex steps, calibrating and testing the ForceTriad can be a lengthy and complicated process, prone to error. Fluke Biomedical has taken the guess work out with an interactive video series that will guide you, step-by-step. Using our QA-ES III Electrosurgical Analyzer, you’ll be able to perform calibration and preventive maintenance on the ForceTriad generator per the manufacturer’s guidelines.

  • Know the tools you’ll need before you begin
  • Start and stop the video as needed
  • Skip to just the section(s) you want

Watch the complete video series and you'll learn:

ForceTriad generator calibration

  • Step 1: LC Filter Tuning
  • Step 2: Set Date and Time
  • Step 3: Brightness Calibration
  • Step 4: Touchscreen Calibration
  • Step 5: Scanner Calibration
  • Step 6: RF Leakage Calibration
  • Step 7: Current Calibration
  • Step 8: Voltage Calibration
  • Step 9: Auto-bipolar Calibration
  • Step 10: REM Calibration

ForceTriad generator preventive maintenance

  • Step 1: Inspect the System and Accessories
  • Step 2: Inspect the internal components
  • Step 3: Test the system
  • Step 4: Verify REM function
  • Step 5: Verify Autobipolar Mode
  • Step 6: Verify Cross Coupling
  • Step 7: Confirm Power Delivery at Receptacle
  • Step 8: Verifying Power Output
  • Step 9: Checking High Frequency Leakage Current
  • Step 10: Safety Testing in Accordance with IEC601

Click the image below to view a sample segment:

ForceTriad™ is a trademark of Covidien AG, photograph used with permission of Covidien

Fluke Biomedical. Trusted for the measurements that matter.